En-suite installation in Bulwell

For HMO en-suite installation in Bulwell, we survey the property, plan each bedroom and escape route to licensing standards, then build to a fixed price for the agreed specification.

Every job in Bulwell starts with a measured survey and a check of Nottingham City Council's current HMO rules.

  • Covering Bulwell and nearby Nottinghamshire towns
  • Quotes itemised so you can compare
  • Designed around Nottingham City Council's HMO standards

Book a survey in Bulwell

Tell us about the property. We reply within one working day.

Most of the cost and risk in an HMO is decided at the design stage. In Bulwell we start by measuring every room and checking Nottingham City Council's position on licensing and planning, then build the specification around it.

Work is carried out by S&K and vetted subcontractors working under S&K's supervision, so you contract with one company for the whole project.

HMO rules in Nottingham City Council

RuleNottingham City Council
Mandatory HMO licence (5+ people)In force everywhere in England
Additional HMO licensingIn force
Whole city, 1 January 2024 to 31 December 2028
Selective licensingIn part of the area
Some or all of 15 wards, 1 December 2023 to 30 November 2028
Article 4 direction for small HMOsIn force
Whole city, since 11 March 2012

Checked October 2026 against Nottingham City Council's HMO licensing page. Schemes change, so we confirm the position for your address before any work starts.

Nottingham City Council has an Article 4 direction across its whole area, so turning a family house in Bulwell into a small HMO needs planning permission. We prepare the planning application before any conversion work starts. Seven or more occupants always needs planning permission. Nottingham City Council also runs additional licensing across its whole area (until 31 December 2028), so smaller HMOs with three or four people from two or more households need a licence too.

En-suite installation in Bulwell: what we do

We fit en-suite shower rooms in HMO bedrooms across Bulwell, starting with a check that each bedroom still meets its size standard once the en-suite is built. Councils take different views on whether en-suite floor area counts, so we confirm the local position first.

Older houses often have joists running the wrong way and soil stacks in fixed positions, so in Bulwell we check the drainage route under the floor before quoting. Every en-suite we fit in Nottinghamshire is finished with a ducted fan, certified electrics and fire stopping.

  • Electrical work tested and certified
  • Drainage route checked under the floor at survey
  • Shower, toilet, basin and wipe-clean wall finish fitted
  • Extract fan ducted to outside with overrun control
  • Fire stopping where pipes pass through floors and walls

En-suite installation near Bulwell

What landlords in Bulwell ask us

What size must bedrooms be in an HMO in Bulwell?

For licensed HMOs in England a room for one adult must be at least 6.51 square metres and a room for two adults at least 10.22 square metres. Nottingham City Council may set additional standards, which we design to.

Do you supply fire doors and alarms as part of a conversion?

Yes. Fire doors, the alarm system and emergency lighting are specified to the fire risk of the house and included in the price, not added later.

How long does an HMO conversion in Bulwell take?

It depends on the size of the house and the work involved. Your written quote includes a programme for each stage, and any planning or licensing time is shown separately.

Can you convert part of a building above a shop in Bulwell?

Often, yes. Flats above shops need extra attention to fire separation from the commercial unit, and we assess this at survey stage.

Got a house in Bulwell in mind?

Send us the address and we'll check the licensing and planning position before we talk about prices.

Call free Guide price